180 Degree PTFE Hose End Fitting Black for PTFE Hose Feela

180 Degree PTFE Hose End Fitting Black for PTFE Hose Featured Image

Tlhaloso e Khutšoanyane:

E etselitsoe ka ho hlaka bakeng sa li-hoses tsa PTFE tse lohiloeng ka tšepe e sa hloekang.E nepahetse bakeng sa sistimi efe kapa efe ea mafura. Li-fittings li ka sebelisoa hape 'me li entsoe ka aluminium ea boleng bo holimo e bobebe, e nepahetseng CNC e entsoe ka mochini mme e felile ka boleng bo holimo ba anodised ka' mala oa setso o motšo.

Nomoro ea mohlala	46 letoto (180 degree)
Tlhaloso	PTFE 180 degree e loketseng
Mefuta e fapaneng ea Theko (EXW)	$1.9-$3.0
Boholo	AN3/AN4/AN6/AN8/AN10
Mmala	Mnyama&Mnyama/Bokhubelu&Boputsoa/Bokhubelu&Batsho
Lintho tse bonahalang	Aluminium 6061-T6
Mofuta oa Sehokelo	Mofuta oa Teflon
Min.Order Palo	Lik'hilograma tse 100
Boima ba 'mele	16G/22G/40G/60G/90G
Sephutheloana	1PC / opp mokotla, 50pcs / ka hare mokotla
Litefiso Melao	T/T, L/C
Boema-kepe ba FOB	Boema-kepe ba Ningbo

Re romelle lengolo-tsoibila

Lintlha tsa Sehlahisoa

Li-tag tsa Sehlahisoa

* Likaroloana

Thepa e entsoeng ka tšepe e sa hloekang ea PTFE AN e sebelisa mohloaare o lekanang le qetellong ea PTFE liner ka tlhokomelo e nkiloeng ho etsa bonnete ba hore lisebelisoa tsohle tsa tšepe tse sa hloekang li lula ka ntle ho mohloaare 'me li sa tšoasoe.Nate e sireletsang e hula ka thata ho fihlela qetellong ea hose 'me ka nako e ts'oanang e koala mohloaare hanyenyane ho tiisa PTFE liner holim'a hose qetellong.46 letoto la lihlooho tse hose tse loketseng litaelo Mohato oa 1
Koahela teipi ea masking ho potoloha sebaka seo ho seha le ho tšoaea boemo bo nepahetseng ba moo sehiloeng se lokelang ho ba teng.Ho na le mekhoa e mengata ea ho seha li-hose shears, "disk cutter" e nang le lehare le moqotetsane la "slitter" kapa "junior hacksaw" e nang le lehare le nang le meno.Ho bohlokoa hore hose e khaotsoe ka lisekoere ebile e otlolohile.Haeba ho sebelisa Junior Hacksaw u se ke ua fana ka khatello kapa braiding e ka 'na ea senyeha.Likotoana life kapa life tse senyehileng tsa braid li ka fokotsoa ka li-snips.Tlosa li-burrs ho tloha qetellong ea tube ka thipa e loketseng 'me u netefatse hore e hloekile ebile e pota-potiloe.
Mohato oa 2
Netefatsa hore hose e chitja ka ho peta ka bonolo ka pliers.Mothating ona thellela nate ea sokete ea hose holim'a hose.Kenya ntlha ea hose ka har'a hose ea PTFE ho netefatsa hore ID e chitja.Tlosa pheletso ea hose le theipi ea masking.
Mohato oa 3
U sebelisa screw driver e nyane kapa khetha ho holisa braid ea tšepe e sa hloekang ka bonolo hole le tšupu ea PTFE hohle.Tlhokomelo e lokela ho nkoa ho netefatsa hore tube ea PTFE ha e senyehe ka tsela leha e le efe.
Mohato oa 4
Sututsa mohloaare/ferrule pheletsong ea tšupu le ka tlas'a loho, etsa bonnete ba hore ha ho loho e pakeng tsa tšupu le mohloaare/ferrule.Qetella ho fumana mohloaare/ferrule ka ho e sututsa ka ho toba sebakeng se bataletseng joalo ka sekotoana sa patsi kaha se ke ke sa tšoaea kapa ho senya ferrule.Hlahloba ho etsa bonnete ba hore tube buts up squarely le
ka botlalo kgahlanong le lehetla le ka hare la fereko.
Mohato oa 5
Lubetsa likhoele tse ntlheng ea hose le nate ea sokete hape u tlotse leqhubu la hose qetellong.Kenya ntlha ea hose ka har'a tube ka ho tšoara hose le ho sututsa nipple e qetellang ea hose ka har'a tube ka ketso ea ho sututsa/sotha ho fihlela e kentse ka ho feletseng.
Mohato oa 6
Tšoara nate ea sokete ka har'a mehlahare ea vice, 'me u boloke sebaka sa kopano, qala ho kopanya sokete le likhoele tsa hose.Ho tla khonahala ho chenchana ho lekaneng ho etsa bonnete ba hore likhoele li tsamaellana hantle.
Mohato oa 7
Tiisa ntlha ea hose ka har'a sokete u sebelisa sepane sa boholo bo nepahetseng.Netefatsa hore ho na le oli likhoeleng ha u ntse u tiisa kopano.Tiisa ntlha ea hose ka har'a sokete ho fihlela u e-na le lekhalo le ka bang 1mm.Lokisetsa lifolete bakeng sa ho qeta mosebetsi oa setsebi.