16FT AN8 Bakin Karfe Braided PTFE Fuel Hose Line Kit

Takaitaccen Bayani:

Mafi kyawun layin iskar mai, Tiyo mai, Clutch tiyo.An ba da shawarar don E85, Alcohol, Nitro, watsa, kama, nitrous, tuƙin wuta, mai, na'ura mai ƙarfi & aikace-aikacen injina.

Lambar samfurin	KT00654SR
Bayani	8AN Kit ɗin layin mai
Kewayon Farashi (EXW)	$29-$42
Girman	16FT mai tiyo + 8AN dacewa
Launi	Ja&Blue
Kayan abu	PTFE da bakin karfe braided
Nau'in Haɗawa	Teflon irin
Min. Yawan oda	10 sets
Nauyi	1500G/saiti
Girman Kunshin	10 sets / kartani, 554425cm
Sharuɗɗan Biyan kuɗi	T/T, L/C
Farashin FOB	Ningbo Port

Aika mana imel

Cikakken Bayani

Tags samfurin

* Bayanin samfur

Aikace-aikace: Universal, kamar: Oil / Fuel / Ruwa / ruwa / Air Line, Ethanol Gasoline
Kunshin Ya Haɗa:

AN8 Madaidaicin Sake Amfani da Swivel Hose End X 4 PCS

AN8 45 Degree Reusable Swivel Hose End X 2 PCS

AN8 90 Degree Reusable Swivel Hose End X 2 PCS

AN8 180 Degree Reusable Swivel Hose End X 2 PCS

AN8 Azurfa Bakin Karfe Braided Hose *5M

Samfuran Duniya: Tushen layin mai ya dace da nau'ikan motoci daban-daban.Kawai zaɓi girman da ya dace.
Halayen Tsaro Don Kariyar ku: Samfurin yana da kyakkyawan jinkirin harshen wuta da kyakkyawan juriya na lalata.
Long Life: Inner PTFE yana da kyakkyawan juriya na lalata.Ba shi da kulawa kuma daidaitaccen injiniya don haɓaka rayuwa.
Ana Ba da Shawarar Ƙwararrun Mai sakawa (Ba a Haɗe Umarni)

* Shigarwa

Shigarwa Mataki na 1
Kunna ƙarshen tiyo tare da tef, wannan zai taimaka rage raguwa.Yanke bututu zuwa tsayi ta amfani da hacksaw mai kyau na garaya ko yanke dabaran.
Bayan yanke, cire tef ɗin, kuma a datse duk wayoyi marasa ƙarfi da wuka ko shears masu kaifi.Sa'an nan zaren / zamewa soket da tiyo ƙare da kula.Maimaita tare da soket na biyu.
NASIHA: Ya kamata a sanya soket na biyu a baya.

Shigarwa Mataki na 2
Yi amfani da ɗimbin kayan aikin raba, don kawar da ƙwanƙolin waje da share kusan inch 1/2 na bututun ciki na PTFE.

Shigarwa Mataki na 3
Ɗauki ɗaya daga cikin ferrules na tagulla kuma danna shi da kyau a kan fallen ƙarshen bututun ciki na PTFE.Cikakkar matsawa hannun rigar ta ƙarshen tiyo a gefen fili mai faɗi.Bututun ciki na PTFE yakamata ya dace da ƙarshen ferrule.

Shigarwa Mataki na 4
Saka nono a cikin bututun ciki na PTFE domin gindin nonon ya yi daidai da ferrule na tagulla.Bayan fara aikin da hannu, ƙila a so a danna madaidaicin muƙamuƙi ko ƙasa mai ƙarfi, don tabbatar da dacewa.

Shigarwa Mataki na 5
Cire soket ɗin ƙasa akan bawon da aka yi da shi na waje da ferrule ɗin tagulla sannan a fara zaren soket ɗin zuwa kan nono da hannu.

Shigarwa Mataki na 6
Da zarar soket da nono suka fara zuwa zaren, sanya nono a cikin mataimakan muƙamuƙi guda biyu kuma yi amfani da kayan aiki ko maɓalli mai daidaitacce don kammala taron.

Shigarwa Mataki na 7
Duk an yi tare da ƙarshen farko, yanzu maimaita don taro na biyu farawa daga mataki na 2.